Tdm Gearing Replacements - Does This Sprocket Fit On The Bike!?

[leehenty]

I have always found the standard hearing adequate, if anything geared very slightly too high.Engines like to rev it lugging them at low revs that does damage

[Kebab897]

Think you can get a 17t front and 39t rear sprocket, that's about as far as you can go without having custom sprockets made up.

I recently cleared the front sprocket chain goo out and thinking there's little chance of anything larger than a 17t front sprocket fitting in there. Also, you may need to change the length of the final drive chain and speedo will be well out.

[sayhello]

hi there good day dear kebab897 

 

thank you for all your input 

<pre class="_prettyXprint">
Think you can get a 17t front and 39t rear sprocket, that's about as far as you can go without having custom sprockets made up.
I recently cleared the front sprocket chain goo out and thinking there's little chance of anything larger than a 17t front sprocket fitting in there. Also, you may need to change the length of the final drive chain and speedo will be well out.</pre>
thank you so much.