pilootdotcom
My HID Xenon installation (low and high beam)
43
72594
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My HID Xenon installation (low and high beam)
<!--quoteo(post=45549:date=Wed 27th Jun 2007, 11:24 AM:name=KIDD)-->QUOTE(KIDD @ Wed 27th Jun 2007, 11:24 AM) <{POST_SNAPBACK}><!--quotec-->Well I had the bike apart this weekend and after inspecting the wiring under the cowling there was no socket for a bulb. I did find what wires I would need to get it done though through the Haynes manual. Just need a ground and I will grab some power off the tail light.<!--QuoteEnd--><!--QuoteEEnd-->
good job then. it shud be easy enough to wire it in.
spyball alarm/immob,
bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir,
forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"
NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel
CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.

engine changed july 20
07 on a dyno run it made
79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.


I loike tay and hang sangwiches !


www.kenhogantreeservices.co.uk

http://s33.photobucket.com/albums/d77/wickla/?sc=6



http://reg.imageshack.us/v_images.php

[Image: post-1-1150550733.gif][Image: post-1-1150550726.gif][Image: post-1-1150559830.gif]


Messages In This Thread
My HID Xenon installation (low and high beam) - by Guest - 19-06-2007, 06:03 PM
My HID Xenon installation (low and high beam) - by Guest - 20-06-2007, 12:24 PM
My HID Xenon installation (low and high beam) - by wicklamulla - 27-06-2007, 02:36 PM

Forum Jump:


Users browsing this thread:
1 Guest(s)