LIAW
Running Fast And Hot
10
2766
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Running Fast And Hot
Lee H did a write-up some time ago and this info is based on my use of that back in 2015. I actually already had a bellows from model boat building!

 

This link should go to a post of mine with two pix. http://www.carpe-tdm.net/ipb/index.php?s...ntry342226

 

The left, taken from the front of the bike during a full valve check, has the cold start mech. at the top. You can see how mucky it can get after just 26,400 miles. The two Phillips / JIS screw heads are difficult to work so when rebuilding use M6 socket heads.

 

The other pic, after rebuild, just shows waterproof grease on the CSM slide - and the difficulty of the screw head access.

 

HTH

TDM900A 2008/09 in use, with     [Image: gallery_179098_391_770.jpg] [Image: sml_gallery_179098_391_1145.jpg]  [Image: gallery_179098_391_1206.jpg] [Image: gallery_179098_391_253.jpg] [Image: gallery_179098_391_82.jpg] [Image: gallery_179098_391_725.gif] [Image: gallery_179098_391_797.jpg] [Image: gallery_179098_391_1396.jpg] [Image: gallery_179098_391_501.jpg] [Image: gallery_179098_391_316.jpg]  [Image: gallery_179098_391_1768.jpg] [Image: gallery_179098_391_106.jpg][Image: gallery_179098_391_2170.jpg] [Image: gallery_179098_391_1373.jpg]

 

CBX750FE in reserve; Cagiva N90 125 now rebuilt & in use.


Messages In This Thread
Running Fast And Hot - by LIAW - 02-02-2025, 04:02 PM
Running Fast And Hot - by dapleb - 02-02-2025, 05:40 PM
Running Fast And Hot - by leehenty - 02-02-2025, 08:15 PM
Running Fast And Hot - by LIAW - 03-02-2025, 05:34 AM
Running Fast And Hot - by leehenty - 03-02-2025, 09:28 AM
Running Fast And Hot - by dapleb - 03-02-2025, 11:40 AM
Running Fast And Hot - by LIAW - 03-02-2025, 02:51 PM
Running Fast And Hot - by leehenty - 03-02-2025, 07:25 PM
Running Fast And Hot - by Studley Ramrod - 04-02-2025, 04:33 PM
Running Fast And Hot - by steve27bha - 04-02-2025, 08:52 PM
Running Fast And Hot - by LIAW - 05-02-2025, 05:09 AM

Forum Jump:


Users browsing this thread:
1 Guest(s)