900 power commander map repository

[TonyDevil]

you can share the files from a bucketofphotos.com like site or email to me and i'll host them

please state where you got the map from
what your setup is :
cans (open/race/brand etc)
co2 settings
any air filter changes
airbox mod done
dyno chart (if you have one)

and any other comments you'd like to make

[sparra99]

Tony, mine are on their way to you in an email.

[Guest]

<!--quoteo(post=86868:date=Wed 11th Jun 2008, 09:17 AM:name=Sparra)-->QUOTE(Sparra @ Wed 11th Jun 2008, 09:17 AM) <{POST_SNAPBACK}><!--quotec-->Tony, mine are on their way to you in an email.<!--QuoteEnd--><!--QuoteEEnd-->
I have put Sparra's map on my bike and can say it's a great map for the staintune pipes.
I have tried with and without DB killers and it runs great. [img]style_emoticons/<#EMO_DIR#>/yahoo.gif[/img] [img]style_emoticons/<#EMO_DIR#>/good.gif[/img] [img]style_emoticons/<#EMO_DIR#>/clapping.gif[/img]
Thanks for sharing this map Sparra

[AJ_Blizzard]

<!--quoteo(post=87398:date=Sun 15th Jun 2008, 04:18 AM:name=Johnno)-->QUOTE(Johnno @ Sun 15th Jun 2008, 04:18 AM) <{POST_SNAPBACK}><!--quotec-->I have put Sparra's map on my bike and can say it's a great map for the staintune pipes.
I have tried with and without DB killers and it runs great. [img]style_emoticons/<#EMO_DIR#>/yahoo.gif[/img] [img]style_emoticons/<#EMO_DIR#>/good.gif[/img] [img]style_emoticons/<#EMO_DIR#>/clapping.gif[/img]
Thanks for sharing this map Sparra<!--QuoteEnd--><!--QuoteEEnd-->
I had booked time for the Dyno today, but when I got there they told me that the Dyno bench was broken... [img]style_emoticons/<#EMO_DIR#>/huh.gif[/img]
Well, no AJ TDM on the Dyno today... maybe later...
As soon it's done I'll share the maps.

[sparra99]

<!--quoteo(post=87398:date=Sun 15th Jun 2008, 12:18 PM:name=Johnno)-->QUOTE(Johnno @ Sun 15th Jun 2008, 12:18 PM) <{POST_SNAPBACK}><!--quotec-->I have put Sparra's map on my bike and can say it's a great map for the staintune pipes.
I have tried with and without DB killers and it runs great. [img]style_emoticons/<#EMO_DIR#>/yahoo.gif[/img] [img]style_emoticons/<#EMO_DIR#>/good.gif[/img] [img]style_emoticons/<#EMO_DIR#>/clapping.gif[/img]
Thanks for sharing this map Sparra<!--QuoteEnd--><!--QuoteEEnd-->
Johnno, glad to hear it worked for you. Do you have your O2 sensor connected or not?

[AJ_Blizzard]

Well, I never heard anything from the garage who was supposed to run my bike on their dyno bench.
I booked a time to do this, but when I got there they told me that they couldn't do the job because the equipment was out of order.
Ok, so I agreed with them that they should get in touch with me as soon as the dyno bench was fixed.
Never heard anything, never got an answer to my email from the shop. So I gave a damn and decided to take the matter in my own hands instead of using money on a shop that seems to give a shit about their customers…

What I did was this; I loaded two PC maps in the Powercommander software in 'Compare Map' mode (Tools | Compare Maps) and made a new map using the average value of the two maps I loaded.
And the maps I used to make the new one are these two:

PC_Map_1.jpg


PC_Map_2.jpg

The result:

PC_Map_3.jpg (emailed to TonyDevil).

I use this map on my TDM with fitted Laser Duo-Tech cans race inserts and airbox mod and CO sensor disconnected.
And it works like a charm!

I big thank you! to hallrob1 (Robin) for sharing the 'Laser Duo Tech slip ons, road legal inserts O2 sensor disconnected Airbox mod HM Racing Custom Map 01689 856595
hmracing.co.uk' map!

Don't ask if the bike uses more or less fuel after I started to use the 'new' map. I haven't checked…

[robgosty]

Hi AJ, did your map allow smooth riding at small throttle openings up to 3000 rev, been running Dandys map but changed to Sparras to check difference, Dandys map is a lot smoother at lower revs but Sparras map seems to give more grunt when giving it a handful, my bike is running Arrow cans, no baffles, K&N filter, o2 disconnected, any chance of mailing me your map so i can give it a go ?
Rob

[AJ_Blizzard]

<!--quoteo(post=91634:date=Sun 20th Jul 2008, 05:35 PM:name=robgosty)-->QUOTE(robgosty @ Sun 20th Jul 2008, 05:35 PM) <{POST_SNAPBACK}><!--quotec-->Hi AJ, did your map allow smooth riding at small throttle openings up to 3000 rev, been running Dandys map but changed to Sparras to check difference, Dandys map is a lot smoother at lower revs but Sparras map seems to give more grunt when giving it a handful, my bike is running Arrow cans, no baffles, K&N filter, o2 disconnected, any chance of mailing me your map so i can give it a go ?
Rob<!--QuoteEnd--><!--QuoteEEnd-->
You've got mail! [img]style_emoticons/<#EMO_DIR#>/tongue.gif[/img]

[robgosty]

Cheers bud

[robgosty]

Hi all, here are three maps for collection, hope no one minds me sharing these as only one is my creation [img]style_emoticons/<#EMO_DIR#>/wub.gif[/img]

http://robgosty.diinoweb.com/files/M406-ttsdandymap.djm (Tuned tdm map, on PC3 when i got it))
http://robgosty.diinoweb.com/files/Robs%20map.djm (as above but modified 3000 rev & below)
http://robgosty.diinoweb.com/files/Sparras%20map.djm (found this one a little jerky at low revs)

Hope it helps

[sparra99]

<!--quoteo(post=92390:date=Mon 28th Jul 2008, 12:25 AM:name=robgosty)-->QUOTE(robgosty @ Mon 28th Jul 2008, 12:25 AM) <{POST_SNAPBACK}><!--quotec-->Hi all, here are three maps for collection, hope no one minds me sharing these as only one is my creation [img]style_emoticons/<#EMO_DIR#>/wub.gif[/img]<!--QuoteEnd--><!--QuoteEEnd-->

No probs from me.
Sparra (Greg)

[sparra99]

<!--quoteo(post=92452:date=Mon 28th Jul 2008, 10:31 AM:name=Sparra)-->QUOTE(Sparra @ Mon 28th Jul 2008, 10:31 AM) <{POST_SNAPBACK}><!--quotec-->No probs from me.
Sparra (Greg)<!--QuoteEnd--><!--QuoteEEnd-->
I finally got around to creating a map from Robs and mine. I have copied Robs up to 3000 rpm and mine from there up. It gives good low speed control but still the power up top. If anyone wants to try it here it is.

[wicklamulla]

ya gotta link to it please Greg ?

[Guest]

<!--quoteo(post=118402:date=Thu 16th Apr 2009, 07:12 AM:name=Sparra)-->QUOTE(Sparra @ Thu 16th Apr 2009, 07:12 AM) <{POST_SNAPBACK}><!--quotec-->I finally got around to creating a map from Robs and mine. I have copied Robs up to 3000 rpm and mine from there up. It gives good low speed control but still the power up top. If anyone wants to try it here it is.<!--QuoteEnd--><!--QuoteEEnd-->


Please. But where?

[AJ_Blizzard]

<!--quoteo(post=118421:date=Thu 16th Apr 2009, 02:07 PM:name=Catteeclan)-->QUOTE(Catteeclan @ Thu 16th Apr 2009, 02:07 PM) <{POST_SNAPBACK}><!--quotec-->Please. But where?<!--QuoteEnd--><!--QuoteEEnd-->
Yeah... would love to try it, but there's no download link in your post... [img]style_emoticons/<#EMO_DIR#>/huh.gif[/img]
Feel free to PM it to me [img]style_emoticons/<#EMO_DIR#>/wink.gif[/img]

Thanks!

[rbanks]

Power Commander - I've not been in on this from the start - has anyone fitted a Power Commander to a stock bike and if so what was the end result? Mine's an 07 model completely standard. I did the air box mod but didn't notice any outstanding improvement to the running and put it back again! What would a Power Commander do for me?

[AussieRick]

Does leaving the O2 sensors disconnected mean that you will have an engine check light on or does this not happen on the TDM, also on some car FI systems an O2 sensor being out and setting a fault code would also mean reduced power as they go into limp home mode???

Cheers Rick

Just recieved my PC3 USB yesterday just have to find time to fit it!

[dandywarhol]

Nah - its too crude - only shows up if you interogate the ECU for fault codes, apart from that it's fine

[AussieRick]

<!--quoteo(post=120165:date=Wed 29th Apr 2009, 07:51 AM:name=dandywarhol)-->QUOTE(dandywarhol @ Wed 29th Apr 2009, 07:51 AM) <{POST_SNAPBACK}><!--quotec-->Nah - its too crude - only shows up if you interogate the ECU for fault codes, apart from that it's fine<!--QuoteEnd--><!--QuoteEEnd-->
Ta thanks for that, now to decide which map to try? 2003 air box mod,DNA filter, and opened and rebaffled stock cans till my Remus arrive hopefully next week.

Cheers Rick

[azza68]

<!--quoteo(post=119809:date=Mon 27th Apr 2009, 04:48 PM:name=banksy)-->QUOTE(banksy @ Mon 27th Apr 2009, 04:48 PM) <{POST_SNAPBACK}><!--quotec-->Power Commander - I've not been in on this from the start - has anyone fitted a Power Commander to a stock bike and if so what was the end result? Mine's an 07 model completely standard. I did the air box mod but didn't notice any outstanding improvement to the running and put it back again! What would a Power Commander do for me?<!--QuoteEnd--><!--QuoteEEnd-->


Bump!!!!

Power Commander on stock bike????


Anyone??????