fixitsan
850 Bits And Pieces
11
1088
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
850 Bits And Pieces
I need to clear the garage.

Looking for this all to go to a good home/custodian or it's going to have to go into the skip

 

I have.....

Petrol tank, black

Front fairing

One side panel (vinyl wrapped)

Rear hugger

A few side chicken fillets ( some lug damage)

A radiator

Pair of front calipers connected to a master cylinder with braided hoses

Tail section  with grabrail.

Odd bits, gear sets, a couple of sprockets

A screen

 

I'll try to get a photo up in the next day or two. I don't have much time to start splitting it and sending lots of packages out.

 

Shipping it all would be a bit pricey due to weight and size, but I don;t mind driving down to Englandshire somewhere to hand over to someone else.

 

Anyone is welcome to come and collect

 

I'll hang on for a few weeks but otherwise due to me knocking down part of the garage for improvements it needs to go.

 

Anyone interested ?

<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
4 pics in this album

There's some cables, clocks, pipes, new ignition lock,   and other odds and sods including thermostat housing

I'm going to see about sneaking them into the loft if anyone is keen and wants to come later in the year ?

 

https://flic.kr/s/aHBqjzLU6o

<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Hi,

I've got an 96 4TX and the fairing has various bits missing so the screws for the inner fairing have nothing to attach to - plus previous owner has broken various inner fairing lugs ... Do you still have them and what conditions are they in ?? Any pics ??

I'm after a new ignition lock if you can split ?

"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"

Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs,  fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
Quote:Hi,

I've got an 96 4TX and the fairing has various bits missing so the screws for the inner fairing have nothing to attach to - plus previous owner has broken various inner fairing lugs ... Do you still have them and what conditions are they in ?? Any pics ??

I think i have an inner fairing but it's cracked, although will hot staple together easily. I think the screw lugs are good though

I'll double check and let you know

Quote:I'm after a new ignition lock if you can split ?

 

Happy to split, I'll double check tomorrow after work
<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Quote:I'm after a new ignition lock if you can split ?
Here's some pics

Ignition lock - does it look like it will fit ? I found it in the bottom of a box of known 850 parts, check the plug, It doesn't look OEM, but if you think it will mechanically fit and you have 4-wires to your existing lock then I'll get you a quote for shipping and you can have the lock for free

 

Mirrors/radiator guard, I'll keep them together for the member who asked about them

 

Inner cowl, it's worse than I remember, but I think if you had nothing else, then a bit of time and some ingenuity with hot staples or a bit of fibreglass underneath and it will hold for a while ? Sorry it's a bit crappy I think a bike leaned on it in the garage. If you want it though, I'll get you a shipping quote too

 

[Image: 52220385176_6eacbbe519_o.jpg]850 bits by Chris Barron, on Flickr

 

 

[Image: 52220655329_3d18925235_o.jpg]850 bits by Chris Barron, on Flickr

 

 

 

 

[Image: 52220385006_397326d24b_o.jpg]850 bits by Chris Barron, on Flickr

 

 

[Image: 52220655219_6b4090af1b_o.jpg]850 bits by Chris Barron, on Flickr

 

 

[Image: 52220655124_b2e2aa1249_o.jpg]850 bits by Chris Barron, on Flickr

 

 

[Image: 52220876510_b83814bfb5_o.jpg]850 bits by Chris Barron, on Flickr

<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
thanks, i'll check the bike tomorrow

"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"

Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs,  fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
thanks, I've checked and mine has 4 blue wires to a connector and black and red separate.

 

never mind

"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"

Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs,  fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
Quote:4 pics in this album

There's some cables, clocks, pipes, new ignition lock,   and other odds and sods including thermostat housing

I'm going to see about sneaking them into the loft if anyone is keen and wants to come later in the year ?

 

https://flic.kr/s/aHBqjzLU6o
Hi,

 

Do you still have the thermostat housing?, mine's leaky leaky

 

thanks
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"

Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs,  fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
Quote:Hi,

 

Do you still have the thermostat housing?, mine's leaky leaky

 

thanks

 

 

I missed this message Drewpy, I'll put it to one side if you still need ?
<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Quote: 

 

I missed this message Drewpy, I'll put it to one side if you still need ?
i still want it, i've fixed it for now but think it won't last.

Thank you  Smile
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"

Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs,  fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.


Forum Jump:


Users browsing this thread:
1 Guest(s)