Posts:
4,875
Threads:
132
Joined:
Dec 2015
Reputation:
0
I need to clear the garage.
Looking for this all to go to a good home/custodian or it's going to have to go into the skip
Â
I have.....
Petrol tank, black
Front fairing
One side panel (vinyl wrapped)
Rear hugger
A few side chicken fillets ( some lug damage)
A radiator
Pair of front calipers connected to a master cylinder with braided hoses
Tail section with grabrail.
Odd bits, gear sets, a couple of sprockets
A screen
Â
I'll try to get a photo up in the next day or two. I don't have much time to start splitting it and sending lots of packages out.
Â
Shipping it all would be a bit pricey due to weight and size, but I don;t mind driving down to Englandshire somewhere to hand over to someone else.
Â
Anyone is welcome to come and collect
Â
I'll hang on for a few weeks but otherwise due to me knocking down part of the garage for improvements it needs to go.
Â
Anyone interested ?
This post was last modified: 24-04-2022, 08:49 AM by fixitsan .
<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Posts:
4,875
Threads:
132
Joined:
Dec 2015
Reputation:
0
4 pics in this album
There's some cables, clocks, pipes, new ignition lock, Â and other odds and sods including thermostat housing
I'm going to see about sneaking them into the loft if anyone is keen and wants to come later in the year ?
Â
https://flic.kr/s/aHBqjzLU6o
This post was last modified: 24-04-2022, 02:04 PM by fixitsan .
<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Posts:
10
Threads:
3
Joined:
Jul 2020
Reputation:
0
Hi,
I've got an 96 4TX and the fairing has various bits missing so the screws for the inner fairing have nothing to attach to - plus previous owner has broken various inner fairing lugs ... Do you still have them and what conditions are they in ?? Any pics ??
Posts:
1,835
Threads:
131
Joined:
Aug 2016
Reputation:
0
I'm after a new ignition lock if you can split ?
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"
Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs, Â fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
Posts:
4,875
Threads:
132
Joined:
Dec 2015
Reputation:
0
Quote: Hi,
I've got an 96 4TX and the fairing has various bits missing so the screws for the inner fairing have nothing to attach to - plus previous owner has broken various inner fairing lugs ... Do you still have them and what conditions are they in ?? Any pics ??
I think i have an inner fairing but it's cracked, although will hot staple together easily. I think the screw lugs are good though
I'll double check and let you know
Quote: I'm after a new ignition lock if you can split ?
Â
Happy to split, I'll double check tomorrow after work
<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Posts:
180
Threads:
22
Joined:
Nov 2020
Reputation:
0
Quote: I'm after a new ignition lock if you can split ?
Posts:
4,875
Threads:
132
Joined:
Dec 2015
Reputation:
0
Here's some pics
Ignition lock - does it look like it will fit ? I found it in the bottom of a box of known 850 parts, check the plug, It doesn't look OEM, but if you think it will mechanically fit and you have 4-wires to your existing lock then I'll get you a quote for shipping and you can have the lock for free
Â
Mirrors/radiator guard, I'll keep them together for the member who asked about them
Â
Inner cowl, it's worse than I remember, but I think if you had nothing else, then a bit of time and some ingenuity with hot staples or a bit of fibreglass underneath and it will hold for a while ? Sorry it's a bit crappy I think a bike leaned on it in the garage. If you want it though, I'll get you a shipping quote too
Â
850 bits by
Chris Barron , on Flickr
Â
Â
850 bits by
Chris Barron , on Flickr
Â
Â
Â
Â
850 bits by
Chris Barron , on Flickr
Â
Â
850 bits by
Chris Barron , on Flickr
Â
Â
850 bits by
Chris Barron , on Flickr
Â
Â
850 bits by
Chris Barron , on Flickr
This post was last modified: 16-07-2022, 06:47 PM by fixitsan .
<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Posts:
1,835
Threads:
131
Joined:
Aug 2016
Reputation:
0
thanks, i'll check the bike tomorrow
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"
Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs, Â fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
Posts:
1,835
Threads:
131
Joined:
Aug 2016
Reputation:
0
thanks, I've checked and mine has 4 blue wires to a connector and black and red separate.
Â
never mind
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"
Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs, Â fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
Posts:
1,835
Threads:
131
Joined:
Aug 2016
Reputation:
0
Quote: 4 pics in this album
There's some cables, clocks, pipes, new ignition lock, Â and other odds and sods including thermostat housing
I'm going to see about sneaking them into the loft if anyone is keen and wants to come later in the year ?
Â
https://flic.kr/s/aHBqjzLU6o
Hi,
Â
Do you still have the thermostat housing?, mine's leaky leaky
Â
thanks
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"
Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs, Â fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
Posts:
4,875
Threads:
132
Joined:
Dec 2015
Reputation:
0
Quote: Hi,
Â
Do you still have the thermostat housing?, mine's leaky leaky
Â
thanks
Â
Â
I missed this message Drewpy, I'll put it to one side if you still need ?
<p style="text-align:center;">Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
Posts:
1,835
Threads:
131
Joined:
Aug 2016
Reputation:
0
Quote: Â
Â
I missed this message Drewpy, I'll put it to one side if you still need ?
i still want it, i've fixed it for now but think it won't last.
Thank youÂ
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"
Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs, Â fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.