850 Destruction

[wicklamulla]

wet well sooner Dablik. 

[MickC]

Definate set back that Dablik get well soon. :good:

 

 

Sorry Dappers :hide:

This post was last modified: 27-04-2020, 03:21 PM by MickC.

[dapleb]

Wha hey...have I got it too?

[dablik]

Cheers chaps :good:

[dablik]

Better update a little here eh

 

Sorted genny

[attachment=o13071][attachment=o13072]

 

Sprocket tamed

[attachment=o13073]

[attachment=o13074]

 

Also snapped a bolt today for the clutch holder bracket, forgot all about this and found the threads full of powdercoat, difficult access to clean it, so the left side frame bracket needs to come off and have the bolt drilled out...

[Studley Ramrod]

I take it you're feeling better now matey ?

 

Looks like a deeper recess on the sprocket nut would have done the job.  D'ya think the additional washer/spacer will make any difference to the chain lining up on the sprocket ?

[dablik]

I take it you're feeling better now matey ?

 

Looks like a deeper recess on the sprocket nut would have done the job.  D'ya think the additional washer/spacer will make any difference to the chain lining up on the sprocket ?

Feeling better for sure cheers Ian, Occy health at work implied i could come out of isolation last week ie back to work, my nurse practitioner at the Doctors surgery had a phone conflab with me and got very pissed off about that, so just have a chest infection to clear up now and off for a further 2 weeks to recuperate..

 

Yes i was thinking along the same lines and pondered asking Lee to make us one, but decided i wanted it sorted hence the spacer, although a new nut/deeper recess prolly the better option, regarding the chain lining up, i tried with the spacer behind the sprocket and then in front and took a look along the chain while i stretched it, hard to say 100% but i think it was straighter with the spacer on the back of the sprocket, a laser pointer would of been ideal, but i chose the back as i believe it places the sprocket where it should be for the nut to torque up..

[alanfavell]

Nice progress & glad your felling a bit better Cliff. Keep popping the pills. :good:

[dablik]

Nice progress & glad your felling a bit better Cliff. Keep popping the pills. :good:

Cheers Al, taken with a spoonful of sugar this morning Hope your well matey..

[alanfavell]

Ready for 10 rounds with Tyson..........  .I hear he likes toast

[wicklamulla]

Ready for 10 rounds with Tyson..........  .I hear he likes toast

 

 

:rotflmmfao:    :good:   very good Favs!

 

look after oneself Cliff and get strong afore returning to that coal face.

[leehenty]

how much extra recess on the nut Cliff ? I got a nut I can bore out extra in a minute of so.

[Medmonic]

back in business i see , let me know if you need any part or screw to finish your job , have 3 engine in the garage floor 

[dablik]

back in business i see , let me know if you need any part or screw to finish your job , have 3 engine in the garage floor 

Thank's Medmonic, i'll keep that in mind :good:

[Matlock]

Good to hear you're back up to fettling fitness Cliff  :good:

[dablik]

Very slow though, keep finding grotty bolts and just cant bring meself to put them on, so that's a long process, anyhoo a bit more done..

[chrisr]

You need to leave it in the vicinity of Lee’s house!

[dablik]

You need to leave it in the vicinity of Lee’s house!

Dont think Lee has this many, some are 28 years old..

[alanfavell]

Hopefully you are in better condition than the fastners by now :good:

[leehenty]

Oh I think I got it covered Cliff...