850 Destruction

[leehenty]

0.01 mm loose is fine as it will only get smaller

[dablik]

Goodo Lee me thinks i'll leave it then till 1st check :good:

[dablik]

Clutch plates soaked and in-situ......summit to bare in mind is that the 3vd's 1st steel plate is a slick plate, not supplied in the new Gecko kit, as all are dimpled and the last friction plate dont have a likkle hole either like oem supposed to..

[attachment=o12952]

[attachment=o12953]

[attachment=o12954]

 

Then a bit of forkin, this i show i managed to torque the damper bolts after a bit of frustration, using the work bench,so if you dont have a vice it's another option.

[attachment=o12960]

[attachment=o12961]

[attachment=o12955]

[attachment=o12956]

[attachment=o12957]

[attachment=o12959]

Yamaha oil seals

[attachment=o12958]

Measuring fork oil

[attachment=o12962]

 

Swing arm out now, needs a new chain slider and endless chain putting on

[attachment=o12963]

Yuk yuk

[attachment=o12964]

[attachment=o12966]

Better

[attachment=o12965]

[attachment=o12967]

Wrong sprock

[attachment=o12968]

Already had stainless nuts but Lee sent me some which are better quality so replaced

[attachment=o12970]

disc bolt cleaning

[attachment=o12969]

[attachment=o12971]

[attachment=o12972]

 

Phew......still more to do :blink:

 

[ramotdm]

Loooking good mate :good:

 

looks like you've broke the back of it now

 

have you sprayed the frame? 

[dablik]

Aye matey took forever, what with the wind blowing an all :good:

[dapleb]

Glamorous squirty oil leveller there dabbers. Right posh version!



What's the doohickey in the pic afore the oil seals?

[dablik]

The doohickey is an oil seal driver, the lubberly Matlock lent it me when i popped around to borra his other big tool, seats them seals wonderful it does..

[dapleb]

Ooooooooo....looks way more elaborate than me piece of PVC pipe. Me likey.

[leehenty]

Them stainless spacers look nice in situ.

Coming along nicely now Cliff

This post was last modified: 18-04-2020, 12:27 PM by leehenty.

[dablik]

Them stainless spacers look nice in situ.

Coming along nicely now Cliff

Yep makes all the difference, got the front one on as well, more Henty specials on me bike.....

 

On another note i've decided i dont like the colour of the fairings really need to be red or grey maybe....but not spending more just now, and i need a used tank cover cos wickers keeps buying them up   

[alanfavell]

Vote for Vivid Red Cocktail :good: it's faster too.

[leehenty]

Cliff, I still have the loaner fork tool centre bit holder for 43mm forks.

[Studley Ramrod]

Good stuff Dabbers. :good:

[dablik]

Cliff, I still have the loaner fork tool centre bit holder for 43mm forks.

These are 41mm Lee, anything with a wedge on the end seems to hold it anyhoo, cept a broom handle, wont fit in..

[dablik]

I expect some are eagerly awaiting an update considering the weather has been so nice, but alas it will be a little while coming, the NHS has gifted me with a present i would rather they had kept, managed to bleed a new brake system this morning but am so jiggered now have to leave the bike alone, very frustrating....

[dapleb]

Oooooh sheet that's not a great birthday present!!!

[madmopedracer]

all these shiney bikes  and first day after lockdown it will be pissing it down and they will be filthy again

i dont care im going for a ride

[Catteeclan]

the NHS has gifted me with a present i would rather they had kept

:o Not this bloody virus I hope. 

[dablik]

:o Not this bloody virus I hope. 

Afraid so Dave and i dont wish it on anybody, be mindful chaps, it aint choosey...

[Snowbird]

Good luck Dabbers and happy birfday, hope you get over it soon.