Fork Oil Seal (mkI)

[ROB1]

<!--quoteo(post=8668:date=Tue 20th Jun 2006, 06:23 PM:name=Stink-Foot)-->QUOTE(Stink-Foot @ Tue 20th Jun 2006, 06:23 PM) <{POST_SNAPBACK}><!--quotec-->Popping them out with air pressure crossed my mind too. I just thought I'd remove the dust seal and circlip and land a few wheelies really hard.. Could ruin the head bearings though.

Then again if the seal leaks enough for oil to pass through surely air would escape through the leak too? In my experience the seals stick pretty hard to their housing in the bottom fork leg and don't come out easily even when taking the forks apart.
I must admit I have no idea what that screw is there for. Could be a drain plug I guess. I recommend draining and flushing the forks properly anyway. There's no way all the crap would come out of hole that small. The forks are bitch to drain, once You're sure You've got all the oil out there's still a litre ready to spill out on Your shoes at the worst possible moment.

Let us know if You find an easier way to get them out. I know I often try to do things the easy and quick way and end up using much more time and effort than doing a thorough job the first time around .
Your Roadster looks wonderful. Isn't the BB engine pretty heavy for it though?

I've dreamed off building a retro rod in 50's style for years. Fitting a flat head in some late 20's coupe perhaps. Didn't they start making Ardun OHV heads again? Maybe one day if I win the lottery or pull a succesful bank job...<!--QuoteEnd--><!--QuoteEEnd-->it is a drain screw.just use if changing oil.full strip is the best way tho.