<!--quoteo(post=70748:date=Thu 14th Feb 2008, 11:04 AM:name=celticbiker)-->QUOTE(celticbiker @ Thu 14th Feb 2008, 11:04 AM) <{POST_SNAPBACK}><!--quotec-->This is the info from the KOYO website for 6028 2rs bearings, they seem to be saying that they are 33mm wide and 210mm o/s
[attachment=o741]
Bearing No. 60282RS
Boundary dimensions(mm)
<!--coloro:#FF0000--><!--/coloro-->d 140
D 210
B 33 <!--colorc-->
<!--/colorc-->
r(min) 2
Basic load ratings(kN) Cr 110
C0r 109
factor f0 15.9
Limiting speed(min-1) Grease lub. 1800
Mounting dimensions(mm) da(min) 149
da(max) 158.5
Da(max) 201
ra(max) 2
(Refer.)Mass(Open type)(kg) 3.55
Think I'm gonna bite the bullet and get one from the dealers and then get it matched
CB<!--QuoteEnd--><!--QuoteEEnd-->
6028 is a different beast to to what I said it was which is a 60/28
<!--quoteo(post=70742:date=Thu 14th Feb 2008, 10:45 AM:name=Galilee)-->QUOTE(Galilee @ Thu 14th Feb 2008, 10:45 AM) <{POST_SNAPBACK}><!--quotec-->Measure the bearing and buy SKF.
I'm sure you'll find a local dealer on their webpage.<!--QuoteEnd--><!--QuoteEEnd-->
Not all bearings are available from the local bearing factor or manufacturer, which what this thread revolves around
the manufacturers use 'specials' to force you to but them from them at highly inflated prices
[attachment=o741]
Bearing No. 60282RS
Boundary dimensions(mm)
<!--coloro:#FF0000--><!--/coloro-->d 140
D 210
B 33 <!--colorc-->
<!--/colorc-->
r(min) 2
Basic load ratings(kN) Cr 110
C0r 109
factor f0 15.9
Limiting speed(min-1) Grease lub. 1800
Mounting dimensions(mm) da(min) 149
da(max) 158.5
Da(max) 201
ra(max) 2
(Refer.)Mass(Open type)(kg) 3.55
Think I'm gonna bite the bullet and get one from the dealers and then get it matched
CB<!--QuoteEnd--><!--QuoteEEnd-->
6028 is a different beast to to what I said it was which is a 60/28
<!--quoteo(post=70742:date=Thu 14th Feb 2008, 10:45 AM:name=Galilee)-->QUOTE(Galilee @ Thu 14th Feb 2008, 10:45 AM) <{POST_SNAPBACK}><!--quotec-->Measure the bearing and buy SKF.
I'm sure you'll find a local dealer on their webpage.<!--QuoteEnd--><!--QuoteEEnd-->
Not all bearings are available from the local bearing factor or manufacturer, which what this thread revolves around
the manufacturers use 'specials' to force you to but them from them at highly inflated prices