<!--quoteo(post=70686:date=Wed 13th Feb 2008, 06:27 PM:name=celticbiker)-->QUOTE(celticbiker @ Wed 13th Feb 2008, 06:27 PM) <{POST_SNAPBACK}><!--quotec-->Anyone know what the part number of the rear wheel bearing is for an '02 900, eg 6206(sprocket carrier) or 6004(front wheel)
Can't seem to find it listed anywhere.
CB<!--QuoteEnd--><!--QuoteEEnd-->
seem to remember this discussion a while back and that it was a special, but then it was found at B&C Express
Let me find the thread
Here it is in the knowledge base
http://www.carpe-tdm.net/ipb/index.php?showtopic=2657
Rear wheel bearings are 60/28 2RS - £8.48 from B&C, although should be able to get them from any bearing factor
Seems a std 60/28 bearing is 28x52x12mm, but according to Fluteplayer, he measured his wheel bearings (which were marked as 60/28 as 25.5x49.5x9.5mm, so it seems another case of bearings marked with a std number but are actually different (see below)
Suzuki are pulling the same stunt with the main bearings for my DRZ400. they are marked as 6306's
They are the same as std 6306, but 18mm thick instead of the normal 19mm. - std 6306's are about a tenner from a bearing factor or generic Koyo from the bike shop, but these specials are Suzuki supply only at £45 ea.... WTF!
£90 for a pair of main bearings - robbing bastards
Can't seem to find it listed anywhere.
CB<!--QuoteEnd--><!--QuoteEEnd-->
seem to remember this discussion a while back and that it was a special, but then it was found at B&C Express
Let me find the thread
Here it is in the knowledge base
http://www.carpe-tdm.net/ipb/index.php?showtopic=2657
Rear wheel bearings are 60/28 2RS - £8.48 from B&C, although should be able to get them from any bearing factor
Seems a std 60/28 bearing is 28x52x12mm, but according to Fluteplayer, he measured his wheel bearings (which were marked as 60/28 as 25.5x49.5x9.5mm, so it seems another case of bearings marked with a std number but are actually different (see below)
Suzuki are pulling the same stunt with the main bearings for my DRZ400. they are marked as 6306's
They are the same as std 6306, but 18mm thick instead of the normal 19mm. - std 6306's are about a tenner from a bearing factor or generic Koyo from the bike shop, but these specials are Suzuki supply only at £45 ea.... WTF!
£90 for a pair of main bearings - robbing bastards