Before Fitting Samios-Remapped Ecu

[Tor]

Tor,

 

contact them regarding flashing a -00 suffix one, I bought one of these with the intention of Samios flashing it, but  it was a no go,

He replied by e-mail that it would work, and then he did the work last spring, so he should know what he's talking about. I only asked here in case there could be further issues with those.

It's sat in a drawer since...

 

I think the torque limiting is 'variable' in terms of being able to notice it, I think there's a slight improvement going up the gears and i think econpomy improved, but I never was willing to pay for a dyno session to see if the claims are realistic or not.

 

The fuel cut is of definite benefit from my point of view.

 

So I looked at a way to disable fuel cut and figured it out (...) my compromise was to disable fuel cut in normal use, but when the brake light is activated fuel cutting is enabled again to re-enable engine braking, sort of the best of both worlds..

 

If you are willing to pay a deposit I could send you the remapped ECU to let you try it out if you like, and I'll go and find the fuel cut defeat device stuff I posted here and give a link to it

 

Here's  the fuel cut thread.

 If you want engine braking when the brake light comes on you only need to add a 12V SPCO relay. £5 covers it all.

Fuel cut thread http://www.carpe-tdm.net/ipb/index.php?s...uel+%2Bcut

Thanks! That's a great offer. I wasn't very clear in saying the ECU was indeed flashed and is waiting for me to fit to the bike.

 

Still unsure about blocking the hose under the airbox. I don't recall what it looks like under there, but there's a vacuum pipe for the flap and a vent hose straight into the box?

 

Interested in the brake-light fuel cut mod! I'll be scrolling that, next.