Tdm 900 - Oil Pressure : Methods, Ways, Solutions To Measure This Important Data

[sayhello]

hi there - thx  for the reply. 

 

 

see the thread https://www.reddit.com/r/Yamaha/comments...a_tdm_900/

 
Hello, i have question because i own yamaha tdm 900 and oil level warning Non stop is active. Bayonet show oil level is max. Any ideas Why this warning is on? Please help me
 
 
Not my area of expertise as a forewarning. With that out of the way, I suspect it's one of two things but have no way to differentiate. One that is the most likely is the oil pressure sensor has failed and is now showing a constant false positive even though there is still pressure. The second is that the oil pump has failed and you actually don't have oil pressure and should be very concerned. If you have kept riding the bike without it running hotter than normal I would look into the sensor first, and possibly replacing it. Tertiary, and a good place to just be sure. The bike is running with the light on correct? As some bikes will let it be on with the cluster prior to start.
As another note, if you haven't run the bike for a long period since, for fear of issues, do not attempt to run it. Just replace the sensor if possible or take it to a qualified mechanic to make sure there is actually oil flow for the safety of your engine.
 
This bike havent oil pressure light Oil LEVEL only
 
But well Maybe it oil level sensor fuck up
 
 
end of citation
 
well for me its pretty important  to have 
 
a. oil-pressure and 
b. oil-temp
 
i want to have those data ...  . so what about some efforts in sensors and measures - with ESP32 or Arduino ...
 
 
i will write more - soon

This post was last modified: 21-11-2023, 10:52 PM by sayhello.