Quote:I used a lump of wood that fits between the mudguard and tyre. Worked well on the off road bike.
Exacary, you obviously engineer the same way as me. :good:Â I have a length of profiled pvc tube for the Enduro.
Â
The trials bike has the mudguard low on the wheel like the TDM hence the gator. Had to scratch my head a little to come up with the idea.
Â
The gator is another length of pvc pipe with a vertical section cut out. It has enough flex to clip snuggly onto the fork and locks solid once the strops are tightened up.
Â
I'm scratching my head on a system which will lock the bikes down via the footrests, summit with a cam or a ratchet. They are commercially available but spendy. Ugh. It would save a lot of faff with the strops and be a lot more secure.
Â
I trailer the bikes on a normal flatbed trailer via rough, corrugated gravel roads and have had a few failures, shall we say... :punishment:
