850 Destruction

[dablik]

Is the washer the same size as the end of crank??

 

Marginall smaller but the bolt is sitting onnit, doesnt seem to be moving, will recheck..dont want to force the bolt out of the puller beyond the bur onnit and fook up the thread in the puller but if i could a spacer would defo fit in.

Cases can be split with rotor on,just take it the local garage or tyre changing place when crank is out.If crank dosent need work leave it on.

 

Mick i thought the balancer shafts had to come out 1st before the crankcases are split, and access is behind the flywheel, i know you've done a couple so if that's the case it's defo an option for me, flywheel will have to come off to be replaced so if i can split the cases i'll cut it off then.

Cliff

are you now converting it to run on a 18v battery, is that the plan?

 

keeping up with you is hard enough mucka, 18000,000v would still have me playing catch up.

This post was last modified: 02-06-2019, 08:13 PM by dablik.