Bike nearly back together
Front and rear wheels rubbed down, 3 coats of primer, 3 top coat black and 1 coat of lacquer. ( look surprisingly good when finished - I was dubious at doing them myself)
New set of bearings fitted to rear wheel - very easy to do
Front and rear brakes serviced and new pads fitted
Brake disc bobbins cleaned and released.
Forks removed and new dust seal slid in to place
Oil and filter changed
Replaced spark plugs
K&N air filter cleaned and re-oiled
New chain and sprocket set fitted (JT)
All silver painted surfaces 'T' cutted
Foot hangers removed and foot rests moving parts copper slipped
Foot hangers cleaned with autosolve
Black plastic parts cleaned with trim cleaner
Took about a week doing a couple of hours a day , lots of radio 2, gallons of hot splosh and bickies
Front and rear wheels rubbed down, 3 coats of primer, 3 top coat black and 1 coat of lacquer. ( look surprisingly good when finished - I was dubious at doing them myself)
New set of bearings fitted to rear wheel - very easy to do
Front and rear brakes serviced and new pads fitted
Brake disc bobbins cleaned and released.
Forks removed and new dust seal slid in to place
Oil and filter changed
Replaced spark plugs
K&N air filter cleaned and re-oiled
New chain and sprocket set fitted (JT)
All silver painted surfaces 'T' cutted
Foot hangers removed and foot rests moving parts copper slipped
Foot hangers cleaned with autosolve
Black plastic parts cleaned with trim cleaner
Took about a week doing a couple of hours a day , lots of radio 2, gallons of hot splosh and bickies
Aluminium Welding with Parkinson,s

