What Have You Done To Your Tdm Today?

[Latestarter]

richierex,

 

I did the mod 3 on my bike plus mod. air box cover, plus Co setting higher from 14 to 54 on both cylinders 

My bike runs very smooth and strong in very low rpm ( from 1200 rpm to the red sone)

No jerkynis or on of effect in low rpm.

I also removed my katyllic converters from my stock exhaust.

You can do it yourself, use the info from this site and from the JBX site.

 

http://www.jbx9.16mb.com/index.php?page=AIR

 

 

Mod number 3 remove it al and modify the airbox cover, also remove 10cm foam on each site to get more air.

Use the info on this forum and you will be oke with your bike.

Put your Co settings around 25 or 30 on both cylinders with stock exhaust, with open exhaust go higher in your Co settings

You have the same ECU like I do, new model from 2007 to 2012.

 

http://s1175.photobucket.com/user/frits4...sort=3&o=1

 

 

Succes with your mods.

 

Greetings, Frits from holland

 

Option B was the route I took while doing a service and this very same document I've just emailed over to smid69 in PDF format :-)