Refitted the rear wheel and new tyre PR3 £90 mytyres.co,uk (£10 fitted, balanced, by Stuart @ Adlington Tyre Fitters nr Chorley, Lancs, don't know the guy personally but highly recommended, decent bloke) after cleaning the inner swingarm, shock, axle etc.
Â
Fitted much heavier YZF600 bar end weights (used, £10 fleabay) after tapping out the Renthals with an M16 x 1.5 tap (£6 fleabay again) then cutting off 12mm at each end of the bars, for the shoulder on the YZF jobbies.Â
Â
I've had problems with excessive hand tingles in both hands in as little as 10mins riding so hope this will solve the issue, if not i'll be looking at head bearings, wheel bearings etc and anything else that may be causing the problem although there's no vibration that I can feel through the bars...............
Â
Fitted much heavier YZF600 bar end weights (used, £10 fleabay) after tapping out the Renthals with an M16 x 1.5 tap (£6 fleabay again) then cutting off 12mm at each end of the bars, for the shoulder on the YZF jobbies.Â
Â
I've had problems with excessive hand tingles in both hands in as little as 10mins riding so hope this will solve the issue, if not i'll be looking at head bearings, wheel bearings etc and anything else that may be causing the problem although there's no vibration that I can feel through the bars...............

