Genuine Yamha Centre Stand

[Bathy]

[attachment=o2742][attachment=o2743]I have just fitted one of the SW Motech centre stands to my 900. Used the spring and washer trick and it worked a treat - thanks. I managed to fit the stand without removing the exhausts although I did have to loosen the right hand side silencer and the centre bolt to access one of the retaining bolts. I also took some of the tension off the assembly by placing a big screw driver in as shown in the picture, this stops the stand pushing on the stop which makes it easier to get the bolts in. I think the spring must sit in closer than the Yamaha one because the exhaust clamp clears the spring although I did cut about 4mm off the bolt just to be on the safe side.