Reviving A -99 Tdm 850

[pilninggas]

In terms of the bolt, in the pic i can see it is 8.8, i think standard yamaha engine/chassis bolts will be 12.9s (higher tensile/shear strength) and so that's what you should look to fit. The surface finish will almost certainly be better (so they are less likely to corrode), you local bolt factor will have 12.9 on the shelf [ideally socket/allen head]

Awesome work on that bracket btw.

This post was last modified: 30-12-2011, 11:29 AM by dapleb.