<!--quoteo(post=16900:date=Mon 18th Sep 2006, 01:13 PM:name=niksa)-->QUOTE(niksa @ Mon 18th Sep 2006, 01:13 PM) <{POST_SNAPBACK}><!--quotec-->do you replace just one or both bulbs?<!--QuoteEnd--><!--QuoteEEnd-->
Only the first scale.(Low Beam)
With the high beam....there is a little problem...because if you use H.I.D. lights you will have a lack (delay)
of 1-2 seconds if u use the signal.
Nobody can get around this...so I changed only the low beam bulb.
The problem is because all H.I.D. systems need 1-2 seconds to get full luminance
Only the first scale.(Low Beam)
With the high beam....there is a little problem...because if you use H.I.D. lights you will have a lack (delay)
of 1-2 seconds if u use the signal.
Nobody can get around this...so I changed only the low beam bulb.
The problem is because all H.I.D. systems need 1-2 seconds to get full luminance