Suspension Set Up

[Kaustic]

Just to add from my experience :

I increased the preload on the front, which of course helped with brake dive but I seemed to also be bottoming out the forks when on bumpier town streets, fine on A roads. So I have been looking at getting the fork rebuilt in the belief that the springs where shagged.

Then had a brainwave & checked the damping which was now fully in i.e max rebound damping. Thus on rough rounds the forks were compressing and not rissing again before the next bump. The damper & preload adjuster are a combined assembeled part so rotating the body of the preload adjuster changes the rebound damping set . So next time you change your preload check the damping afterwards !

K