(Car) Replacing Abs Pump - Rhoughts On Bleeding

[bjorge]

...and now - all tightened.

Next: bleeding😎

[bjorge]

Success!!!! Temporarily fitted battery and took a short trip on our snowy roads😎

Only concern is a warning light for DSP and a message saying Hill hold is deactivated. I may have missed having removed two plugs when dismantling - only refitted 1 (air intake)
...and I need to reset battery warning...

[dapleb]

Woooohoooo noice bjorgey.



For the uploads all I can suggest is delete older stuff.

This post was last modified: 25-01-2026, 07:07 PM by dapleb.

[bjorge]

Okay, will try that!
Saved myself some £2.200 by using a good bit of my spare time for 2 weeks. Not bad😄

[Catteeclan]

Well done Bjorge.

We have companies over here we can send electronics off to for repair. Think my last ford abs unit was £220.

Saves a lot of re-programing probs and time.

DSP and hill hold are all controlled by the ABS unit I think. Maybe a good idea to clear any codes and another road test.

[bjorge]

I'm just about to do the final assembly after yesterday's test. I kept the original electronics, swapped the pump/valve body. If I can't find any unconnected plugs I'll just leave as is for now. Too f%&@king cold (-10). As long as ABS works I'm ok so far.

Resetting battery monitoring, but I don't expect this to fix DSP error.

[bjorge]

Have to get codes read/erased. DSP light on dash. Otherwise happy😎

[LIAW]

great job, well done and keep going, I'll do all I can on a motorcycle but I'll take our car to a repair garage as I hate working on cars,

ps. someone would have to be pretty low to pick pocket a dwarf