+- Forums (https://www.carpe-tdm.net)
+-- Forum: Start your Engine (https://www.carpe-tdm.net/forumdisplay.php?fid=6)
+--- Forum: All About TDM (https://www.carpe-tdm.net/forumdisplay.php?fid=22)
+--- Thread: Speedo Not Working After Wheel Off (/showthread.php?tid=74)
Speedo Not Working After Wheel Off - JMC - 17-06-2025
As above lads, 2000 4tx, had wheel off and not working now, never had an issue before, re checked wheel position and it's fitted correctly is there something else I'm missing before I start ripping at the weekend.
Speedo Not Working After Wheel Off - Snowbird - 17-06-2025
Tabs on speedo sensor broken or disengaged most likely.
Speedo Not Working After Wheel Off - dapleb - 17-06-2025
Yeah that.
Speedo Not Working After Wheel Off - JMC - 20-06-2025
Quote:Tabs on speedo sensor broken or disengaged most likely. Where it connects to the wheel?
Â
Â
I think the tabs looked ok so wondering if they are broken inside that piece itself or is that whet you mean?
Speedo Not Working After Wheel Off - dablik - 20-06-2025
Sometimes the inner cable can loosen a little when you've had the wheel off, so it's then not connected properley behind the clocks !?Â
Speedo Not Working After Wheel Off - Studley Ramrod - 05-07-2025
Yeah, better to connect at wheel, then connect at speedo as the inner cable can slip out of the speedo.
Speedo Not Working After Wheel Off - dapleb - 13-07-2025
Any luck?
Speedo Not Working After Wheel Off - JMC - 11-08-2025
Quote:Sometimes the inner cable can loosen a little when you've had the wheel off, so it's then not connected properley behind the clocks !?ÂÂ
i'm hoping this is the problem, it does make sense as it worked fine before I had the wheel off
Â
Quote:Any luck?Â
Been crazy busy so hopefully next week :hide: