Rmg Centre Stands - Printable Version +- Forums (https://www.carpe-tdm.net) +-- Forum: Market (https://www.carpe-tdm.net/forumdisplay.php?fid=4) +--- Forum: Your Reviews (https://www.carpe-tdm.net/forumdisplay.php?fid=11) +--- Thread: Rmg Centre Stands (/showthread.php?tid=7116)

Rmg Centre Stands - TDMick - 07-06-2015 There's a thread somewhere about these centre stands from Poland, Muddy, AliG and I clubbed in together to get 3, and that's what we did to our TDMs today    They arrive well packed and with all the bits n bobs needed. [attachment=o6207]   It's recommended that the exhaust headers are loosened or removed to allow access for  the fixing plate.Fine for my bike (all shiney n new), but for those with exhaust header nut issues (you know who you are)  , we found that we could access the fixings by removing the exhaust cans and stressing the pipes to give just enough room to get the bolts in and tightened up. [attachment=o6212]   [attachment=o6209] The bolt arrowed caused us some serious problems (seen here on my bike) as it is on the dirty side and the threaded hole was found to be full of crud on Muddy's and Ali's bikes, and with the exhausts in the way, well they are a PITA. The solution appears to be; center bolt to hold the weight and the left bolt fitted first.   All in all this a class bit of kit, which appears to be solidly made and damn good value. Simple to fit, if a bit fiddly (OK a lot fiddly if the headers are an issue), and, I think,  well designed. :badgerrock:  :badgerrock:   Here's the link to RMG's website http://www.rm-g.pl/yamaha-tdm-900-centralna-podstawka/ Rmg Centre Stands - muddy - 07-06-2015 Just to add, Rafal, who makes the centres stands, was very polite, helpful and efficient. Because of the language barrier, communication needed to be unambiguous and to the point to avoid confuddleness. Luckily, Google Translate managed to get the message across and all went smoothly.   A solid bit of kit. Polish engineering at it's best--eat your heart out Herr Motech Rmg Centre Stands - dablik - 07-06-2015 Good to know, i really fancied the wingrack he makes, just not enough patience.. Rmg Centre Stands - TDMick - 07-06-2015 BTW Many thanks to Muddy for his skill as a translator/importer. :good: Rmg Centre Stands - agrantg - 20-02-2016 I intend ordering another centre stand and engine bars for my new 900. If anyone is thinking of getting a set, let me know and I will do a bulk order. We saved a fortune on carriage last year by getting 3 centre stands and a set of engine bars together. I will let you know what the current price is as soon as I get a reply. Ali Rmg Centre Stands - Kelpie - 21-02-2016 Count me in for a centre stand please, Ali. Reckon a new thread on this might be a good idea? Rmg Centre Stands - agrantg - 19-03-2016 Just bumping this as an aid to those who will be fitting their new stands. Rmg Centre Stands - TDMick - 20-03-2016 There'll be more How To photos  posted tomorrow night. Rmg Centre Stands - leehenty - 21-03-2016 the bolts that hold this on are M8 x 1.25 standard pitch so if the hole is full of crud a cheapo carbon plug tap will clean it out.