Forums
Help Needed With Aftermarket Exhausts Connection On A 2005 900 - Printable Version

+- Forums (https://www.carpe-tdm.net)
+-- Forum: Start your Engine (https://www.carpe-tdm.net/forumdisplay.php?fid=6)
+--- Forum: All About TDM (https://www.carpe-tdm.net/forumdisplay.php?fid=22)
+--- Thread: Help Needed With Aftermarket Exhausts Connection On A 2005 900 (/showthread.php?tid=416)

Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 22-05-2023

Anyone know the angle of the exhaust bend on the standard 900 exhausts?

I'm going to fit aftermarket exhausts and need to know the "bend' configuration coming from under the engine to the exhaust inlet.



Help Needed With Aftermarket Exhausts Connection On A 2005 900 - agrantg - 23-05-2023

Quote:Anyone know the angle of the exhaust bend on the standard 900 exhausts?

I'm going to fit aftermarket exhausts and need to know the "bend' configuration coming from under the engine to the exhaust inlet.
I got link pipes made up for my aftermarket pipes. See pic. They have a 10 degree bend and I think they are spot on. I am just about to put them up for sale if you haven't already bought pipes. £100 complete. Ali


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 23-05-2023

Damn! I already bought the mufflers from Motea. Just need the link pipes now.

That setup on your bike is just what I'm after. 

So - 10% angle then. 

What's the OD on those link pipes?

Are you selling the pipes and mufflers for £100, or just the link pipes?



Help Needed With Aftermarket Exhausts Connection On A 2005 900 - agrantg - 23-05-2023

Quote:Damn! I already bought the mufflers from Motea. Just need the link pipes now.

That setup on your bike is just what I'm after. 

So - 10% angle then. 

What's the OD on those link pipes?

Are you selling the pipes and mufflers for £100, or just the link pipes?
Selling the whole lot for £100. I can dig out the exact spec of the link pipes I got made up. Bought them from a company on Ebay.


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - agrantg - 23-05-2023

This is the link for the link pipes - MIJ Exhausts. I'll need to measure the length, but the ID to fit on the TDM downpipes is 38mm. The other end will be to fit your exhausts. Mine were 52mm IIRC.

 

https://www.ebay.co.uk/itm/233305914171



Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 23-05-2023

Cheers mate!



Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 29-05-2023

By the way, did you have to alter the CO with those aftermarket cans on?



Help Needed With Aftermarket Exhausts Connection On A 2005 900 - fixitsan - 29-05-2023

Quote:By the way, did you have to alter the CO with those aftermarket cans on?

The CO setting only adjusts mixture at low rpm with low load.

The oxygen sensor in the downpipe tells the ECU to adjust the fueling if necessary


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 29-05-2023

Quote:The CO setting only adjusts mixture at low rpm with low load.

The oxygen sensor in the downpipe tells the ECU to adjust the fueling if necessary
so in essence, no need to recalibrate the CO after fitting aftermarket pipes then?


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - chrisr - 29-05-2023

No

Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 29-05-2023

I'm regretting buying those aftermarket mufflers from MOTEA now that I've seen what you're selling. I think yours are the same mufflers as the ones I'm buying. Plus I have to buy the intermediate pipes as well. It'll end up costing me twice what you're asking for basically the same thing.

Do you still have your set for sale?


Quote:Selling the whole lot for £100. I can dig out the exact spec of the link pipes I got made up. Bought them from a company on Ebay.
<p style="color:rgb(40,40,40);font-family:helvetica, arial, sans-serif;">I'm regretting buying those aftermarket mufflers from MOTEA now that I've seen what you're selling. I think yours are the same mufflers as the ones I'm buying. Plus I have to buy the intermediate pipes as well. It'll end up costing me twice what you're asking for basically the same thing.

<p style="color:rgb(40,40,40);font-family:helvetica, arial, sans-serif;">Do you still have your set for sale?


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 01-06-2023

Quote:Selling the whole lot for £100. I can dig out the exact spec of the link pipes I got made up. Bought them from a company on Ebay.
Are they still for sale?


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - agrantg - 01-06-2023

Quote:Are they still for sale?
Sorry. I have decided to hold on to them for a while.


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - toddyboy - 01-06-2023

Quote:Sorry. I have decided to hold on to them for a while.
ok, no probs


Help Needed With Aftermarket Exhausts Connection On A 2005 900 - andy916 - 14-10-2024

Hi AliG, did you keep the pipes and do you have any further plans to sell? I'm also interested in Motea cans and link pipes. Thanks for the link for MIJ exhausts, they're just over an hour east of me.