Silver 850 Fuel Tank 4 sale - Printable Version +- Forums (https://www.carpe-tdm.net) +-- Forum: Market (https://www.carpe-tdm.net/forumdisplay.php?fid=4) +--- Forum: For Sale (https://www.carpe-tdm.net/forumdisplay.php?fid=8) +--- Thread: Silver 850 Fuel Tank 4 sale (/showthread.php?tid=37111)

Silver 850 Fuel Tank 4 sale - dbninja - 13-05-2006 All thaught i would offer it here first i have a fuel tank for sale to fit an upto 99 mkII 850 TDM, its in very good condition, no dents or scratches, it has a couple of tiny stone chips that have been touched-up but you would really have to getclose up to see em, its silver with two original yellow flashes in the knee area so its for a Yellow/Silver bike. fuel tap fitted but no filler cap. i bought it for mine but it has not got the fuel gauge sender detail for my year 2000 850. would swap for a black or silver tank with the hole for the gauge sender or sell for £60 plus post (guess about £12.50 post) can send photo if required, but will be away all next week ta dbninja Silver 850 Fuel Tank 4 sale - wicklamulla - 13-05-2006 cudya not cut out a hole ferrit ninja dood??? Silver 850 Fuel Tank 4 sale - dbninja - 13-05-2006 <!--quoteo(post=5042:date=Sat 13th May 2006, 08:28 PM:name=wicklamulla)-->QUOTE(wicklamulla @ Sat 13th May 2006, 08:28 PM) <{POST_SNAPBACK}><!--quotec-->cudya not cut out a hole ferrit ninja dood???<!--QuoteEnd--><!--QuoteEEnd--> nope Wicky. am an Engineer by trade and will always make or alter "whatever" and make it fit! have access to most Engineering processes being an Industrial model maker. but this one i dont think is worth the hassle, the spare tank is an absolute belter too and the one one my bike is a bag-o-shite! which is why i have a baglux cover on it! will chuck it on ebay if no takers dbninja Silver 850 Fuel Tank 4 sale - LIAW - 13-05-2006 if it were me, I'd cut an area of metal out surrounding the mounting hole in the original tank and then cut out a slightly smaller hole in the better tank and weld the 'hole' section from the bad tank into it, I have done this modification with fuel cap sections and fuel tap sections on various tanks in the past with no problems, and as it's on the underside of the tank you don't even need to bother filling it smooth if you don't want to. ps. I always wash out all traces of petrol first, thought I'd mention that before someone piped in with an odd comment, but then again odd comments are the life force of space dust eating fish, so feel free and pay to look. Silver 850 Fuel Tank 4 sale - dbninja - 14-05-2006 [quote name='laughin in a windstorm' date='Sat 13th May 2006, 11:21 PM' post='5053'] if it were me, I'd cut an area of metal out surrounding the mounting hole in the original tank and then cut out a slightly smaller hole in the better tank and weld yep, thaught about that too... was going to cut out a doubler plate and weld or braze it on then drill & tap through, BUT the sender unit screws into a plastic/rubber insert pressed in on the inside of the tank and this is an integral part of the sealing of the sender unit against the underside of the tank, the metal mounting area is all single thickness and is a pressed detail in the underside of the tank, the chances of getting this lot welded on without it distorting are slim to non existant. would probly end up ruining a good tank ps. I always wash out all traces of petrol first, ,,,,,,,, always worth the trouble dbninja Silver 850 Fuel Tank 4 sale - dandywarhol - 14-05-2006 I'd the opposite problem........I'd to weld a plate over the hole to fit a mk2 Silver 850 Fuel Tank 4 sale - Simonfish - 21-05-2006 Hi - how much do you want for it - i have yellow/silver mk 2 which I bought with tank cover/bag - lifted cover & found dent!!! Silver 850 Fuel Tank 4 sale - dbninja - 23-05-2006 <!--quoteo(post=5631:date=Sun 21st May 2006, 10:53 AM:name=Simonfish)-->QUOTE(Simonfish @ Sun 21st May 2006, 10:53 AM) <{POST_SNAPBACK}><!--quotec-->Hi - how much do you want for it - i have yellow/silver mk 2 which I bought with tank cover/bag - lifted cover & found dent!!!<!--QuoteEnd--><!--QuoteEEnd--> Simonfish sorry for the delay, just got back off hols...... £60 plus post mate, you wont be dissapointed, can send you photos if you want. dbninja Silver 850 Fuel Tank 4 sale - Simonfish - 12-06-2006 <!--quoteo(post=5828:date=Tue 23rd May 2006, 06:34 PM:name=dbninja)-->QUOTE(dbninja @ Tue 23rd May 2006, 06:34 PM) <{POST_SNAPBACK}><!--quotec-->Simonfish sorry for the delay, just got back off hols...... £60 plus post mate, you wont be dissapointed, can send you photos if you want. dbninja<!--QuoteEnd--><!--QuoteEEnd--> Piccys would be appreciated - Pm me Hope hols were good!! simonfish