Finally... I got one too... - Printable Version +- Forums (https://www.carpe-tdm.net) +-- Forum: Piston broke (https://www.carpe-tdm.net/forumdisplay.php?fid=5) +--- Forum: Hyde Park Inn (https://www.carpe-tdm.net/forumdisplay.php?fid=16) +--- Thread: Finally... I got one too... (/showthread.php?tid=36352)

Finally... I got one too... - robizhood - 02-08-2006 Hi everyone, I fell in love to the TDM on the 2000 at that time I had a "bulky" Honda Shadow 750, finally last saturday I bought my birthday present ( I belive the best I have ever done ), a Grey second hand 850, I cannot stop to watch her... it is real...! There are some minor work to do and I will love on doing it, any advice on how to remove rust on front disks and screws? I think the previous owner had left her under the rain without care, so sad... I hope to enjoy this bike despite....... I live and work in London and the traffic sometimes is unbelievable. Thanks for any help yahoo.gif . Patrik Finally... I got one too... - tdm850rider - 02-08-2006 Congratulations Patrik, Welcome to Carpe. Finally... I got one too... - duibhceK - 02-08-2006 <!--quoteo(post=12916:date=Thu 3rd Aug 2006, 12:26 AM:name=robizhood)-->QUOTE(robizhood @ Thu 3rd Aug 2006, 12:26 AM) <{POST_SNAPBACK}><!--quotec-->There are some minor work to do and I will love on doing it, any advice on how to remove rust on front disks and screws?<!--QuoteEnd--><!--QuoteEEnd--> if it's really the disks, than it's easy. just cleaned the rust of of the div600 that has been standing in the garage here ever since my gf bought her z750. It goes a little bit like this: get in sadle, start engine, pull up nice and hard, break really hard. Repeat 3 or 4 times and the front disks will look shiny new... Finally... I got one too... - robizhood - 02-08-2006 Cheers "duibhce", I managed to clean the disk in that way but what really annoyng me is the rust trough the disk-holes, someone adviced me to use the wd-40, it didn't remove the rust. Thanks. Patrik Finally... I got one too... - ChrisG - 02-08-2006 <!--quoteo(post=12919:date=Thu 3rd Aug 2006, 12:15 AM:name=robizhood)-->QUOTE(robizhood @ Thu 3rd Aug 2006, 12:15 AM) <{POST_SNAPBACK}><!--quotec-->Cheers "duibhce", I managed to clean the disk in that way but what really annoyng me is the rust trough the disk-holes, someone adviced me to use the wd-40, it didn't remove the rust. Thanks. Patrik<!--QuoteEnd--><!--QuoteEEnd--> If you plan on getting WD40 anywhere near the brakes make sure you give them a good dose of brake degreaser to clean them afterwards Finally... I got one too... - iand1947 - 03-08-2006 <!--quoteo(post=12919:date=Thu 3rd Aug 2006, 12:15 AM:name=robizhood)-->QUOTE(robizhood @ Thu 3rd Aug 2006, 12:15 AM) <{POST_SNAPBACK}><!--quotec-->Cheers "duibhce", I managed to clean the disk in that way but what really annoyng me is the rust trough the disk-holes, someone adviced me to use the wd-40, it didn't remove the rust. Thanks. Patrik<!--QuoteEnd--><!--QuoteEEnd--> I would (and I do) just ignore the rust that's in the holes and not on the surface of the disks - it will only return, and with chemicals (especially oily ones like WD40) there's too much danger of damaging the braking efficiency. Better to be safe than shiny. Welcome, anyway. Finally... I got one too... - LIAW - 03-08-2006 you could paint inside the holes with an engine laquer (others will burn away quickly), just use a small paint brush and wipe any excessive paint off the disc face, small amounts will be removed by the pads in normal action, but trying to remove large areas of paint with the pads will probably contaminate the pads and lessen their frictional qualities. Finally... I got one too... - wicklamulla - 03-08-2006 welcome Patrik, have you any pictures of the bike for us to look at ?? ps what country are you from ? wIcK Finally... I got one too... - robizhood - 03-08-2006 Thanks for all yours usefull hints, I will leave the disks heal themself, now I have to buy some protective clothes and after I will some addons for my bike. I am Italian, I work as a posty in London, anyone else from there? Patrik Finally... I got one too... - wicklamulla - 06-08-2006 <!--quoteo(post=13029:date=Thu 3rd Aug 2006, 10:57 PM:name=robizhood)-->QUOTE(robizhood @ Thu 3rd Aug 2006, 10:57 PM) <{POST_SNAPBACK}><!--quotec-->Thanks for all yours usefull hints, I will leave the disks heal themself, now I have to buy some protective clothes and after I will some addons for my bike. I am Italian, I work as a posty in London, anyone else from there? Patrik<!--QuoteEnd--><!--QuoteEEnd--> Hi P i used to live in London (Queens Park and Tooting Broadway) but i now live in Devon. ciao Wick