+- Forums (https://www.carpe-tdm.net)
+-- Forum: Start your Engine (https://www.carpe-tdm.net/forumdisplay.php?fid=6)
+--- Forum: All About TDM (https://www.carpe-tdm.net/forumdisplay.php?fid=22)
+--- Thread: Possible Hydraulic Clutch Conversion (/showthread.php?tid=274)
Possible Hydraulic Clutch Conversion - alanfavell - 14-02-2024
As it says above - your thoughts please regarding suitability / feasability after some slight modification (bearting in mind my limp 9er wrists) .......
Â
[attachment=o15490]
Possible Hydraulic Clutch Conversion - Snowbird - 15-02-2024
I looked at doing similar and got hold of a similar ram and a hydraulic master cylinder but those rams need a big bore mc to get enough stroke, I fitted a new cable and realised I didn't need it, hadn't banked on just how buggered the cable was just assumed it had a heavy clutch.
Possible Hydraulic Clutch Conversion - fixitsan - 15-02-2024
What about extending the clutch release lever, down on the clutch cover ?
It would reduce the range of useful movement, but require less torque