+- Forums (https://www.carpe-tdm.net)
+-- Forum: Start your Engine (https://www.carpe-tdm.net/forumdisplay.php?fid=6)
+--- Forum: All About TDM (https://www.carpe-tdm.net/forumdisplay.php?fid=22)
+--- Thread: 3Vd/4Tx Bodywork (/showthread.php?tid=12)
3Vd/4Tx Bodywork - Snowbird - 21-03-2026
How much 3vd bodywork fits a 4tx?
I now have a spare 4tx and always preferred the look of the 3vd so wondering if a project could be on the cards.
3Vd/4Tx Bodywork - dapleb - 21-03-2026
Norra lot SB.
3Vd/4Tx Bodywork - Snowbird - 21-03-2026
That's good as it's probably saved me money.
Cheers Dapster.
3Vd/4Tx Bodywork - Snowbird - 30-03-2026
Mmm the more I look at haynes manual pics compared to the 4TX I have the more I'm thinking a full set of tank/seat/side panels and nose fairing might just go with a bit of fettling here and there.
Consider me on the lookout for a project Mk1 as a donor, I should have snapped up Wicker's Mk1 when it was going.
3Vd/4Tx Bodywork - Catteeclan - 30-03-2026
Quote:Mmm the more I look at haynes manual pics compared to the 4TX I have the more I'm thinking a full set of tank/seat/side panels and nose fairing might just go with a bit of fettling here and there.OOooooo, 3 third tdm, you've got it bad.
Consider me on the lookout for a project Mk1 as a donor, I should have snapped up Wicker's Mk1 when it was going.
3Vd/4Tx Bodywork - dapleb - 30-03-2026
He had a load of mk1 bodywork off dabbers. Dunno where that went though.
3Vd/4Tx Bodywork - Studley Ramrod - 02-04-2026
It came to me, to move on for Mole. Tbh, it was mostly very shabby. I sold the barnyard mk1 and panels to Coxylaad who the sold it on to Big Dave.
I think you'd also need the inner cockpit and clocks and the front panel subframe. Either way, it'd take some doing. I once saw a mk2 with mk1 panels and nothing lined up