Forums
What Have You Done To Your Tdm Today? - Printable Version

+- Forums (https://www.carpe-tdm.net)
+-- Forum: Start your Engine (https://www.carpe-tdm.net/forumdisplay.php?fid=6)
+--- Forum: All About TDM (https://www.carpe-tdm.net/forumdisplay.php?fid=22)
+--- Thread: What Have You Done To Your Tdm Today? (/showthread.php?tid=8583)



What Have You Done To Your Tdm Today? - bjorge - 07-03-2016

Quote:Ah the continuing mystery of the disappearing well nut, will we ever solve it?
 

Dunno, but I know that if we eventually do, we will find it besides a whole century worth of lost single socks....



What Have You Done To Your Tdm Today? - leehenty - 07-03-2016

started out with good intentions with my new silicone hoses, stainless hose clips and some bits of carbon bling under my arm. Got started in garage, then phone call from nephew, his bike is dead so put it all away to go fix his bike.  :rant:

A cold afternoon and into the evening was had sorting out his ignition switch.

 

I'll have another go tomorrow and switch my phone off  Big Grin




What Have You Done To Your Tdm Today? - humbertronic - 08-03-2016

Day dreamt about it, riding it around some long sweeping bends at high speed somewhere warm with shiny black tarmac  Rolleyes




What Have You Done To Your Tdm Today? - fixitsan - 08-03-2016

Had a look in the garage to make sure it was still there.


What Have You Done To Your Tdm Today? - erdferkel - 09-03-2016

gave her and the xt a quick clean, check of oil and chain lube to get the salt off and to be ready for the weekend.  the forecast looks nice Wink




What Have You Done To Your Tdm Today? - leehenty - 09-03-2016

new coolant hoses fitted with stainless clips,  carbon bits fitted to fuel cap and new coolant put in. Finally back together.




What Have You Done To Your Tdm Today? - ProudViking - 09-03-2016

Quote:new coolant hoses fitted with stainless clips,  carbon bits fitted to fuel cap and new coolant put in. Finally back together.
Ooh it sounds flash Wink



What Have You Done To Your Tdm Today? - arthurbikemad - 10-03-2016

Ooo pictures, pictures... 




What Have You Done To Your Tdm Today? - ProudViking - 10-03-2016

Checked the battery...still 3 full lights! I'm not used to this :clapping: , Then let the engine purr for a while.




What Have You Done To Your Tdm Today? - leehenty - 10-03-2016

and now found me fork gaitors have a small tear in them, so another job to be done. Confusedorry:




What Have You Done To Your Tdm Today? - arthurbikemad - 11-03-2016

I get about two years from them, but given I found some OEM gaiters that are close to the eBay one's for £86.00!! I think I will stick with the 20quid'ers :S Not much choice on the buggers that's the problem.




What Have You Done To Your Tdm Today? - BSM - 11-03-2016

Stripped all the plastic off the front end yesterday. Removed a load of messy electrics from the aging (cheap) auxilliary lights I binned and tidied the alarm wiring. Fitting the brand new dash panel today after also binning the old one along with the 12v socket, aux light switch and alarm LED. Fitted a Givi satnav case with integral 12v accessory socket and USB charger stolen off Kelpie's bike. Cleaned the K&N air filter and will refit all today. Also fitting new Givi running lights thanks to Mrs BSM (aka Kelpie). Biker wives rock!


What Have You Done To Your Tdm Today? - leehenty - 11-03-2016

Quote:I get about two years from them, but given I found some OEM gaiters that are close to the eBay one's for £86.00!! I think I will stick with the 20quid'ers :S Not much choice on the buggers that's the problem.
I'll be ordering another set from you then, they were good and have been on over two years

Quote:Stripped all the plastic off the front end yesterday. Removed a load of messy electrics from the aging (cheap) auxilliary lights I binned and tidied the alarm wiring. Fitting the brand new dash panel today after also binning the old one along with the 12v socket, aux light switch and alarm LED. Fitted a Givi satnav case with integral 12v accessory socket and USB charger stolen off Kelpie's bike. Cleaned the K&N air filter and will refit all today. Also fitting new Givi running lights thanks to Mrs BSM (aka Kelpie). Biker wives rock!
er these 'stolen'bits, does she know ?



What Have You Done To Your Tdm Today? - Kelpie - 11-03-2016

Quote: 

er these 'stolen'bits, does she know ?
 

Darn right she does!  I'm watching him... just cos it's his birthday doesn't means he gets to pinch bits off me bike!

 

Well I've had a busy day.  Whilst BSM has had all the plastics removed off his bike, I decided to tackle some of the bits that have needed attention for a long time.  There were a few dodgy lugs that I've repaired with copper wire from a piece of coaxial cable, home made fairing glue, araldite, chopped up old dash panel and a bit of ice cream carton.

 

I used the dremel to drill tiny holes in the broken bits.  I'm allowed to use the dremel as it's nearly considered a "girl's tool" and I'm unlikely to disembowel myself with it.  :blush2:

 

[attachment=o7582]

 

The coaxial stuff is handy as you can pull threads out to make the wire as thick or thin as you want.

[attachment=o7583]

 

Threaded wire through the holes in the broken off  bit.

 

[attachment=o7584]

 

Bung it into place and wire to wee holes I drilled where it broke off.  (Fiddly - like milking a bloomin mouse)

[attachment=o7585]

 

Daub in copious amounts of araldite and pack underneath and around the wires in home-made fairing glue. Snip off spare wire once it's set.

[attachment=o7586]

 

Home made fairing glue in a marmalite pot.  Made it about 3 years ago by chopping up plastic welding rods (compatible with TDM fairing material) and soaking in acetone.  It forms a glob in the bottom of the acetone that keeps forever provided it's airtight.

[attachment=o7587]

 

Another lug repair using the same method and a piece of the old dash fairing.  

[attachment=o7588]

[attachment=o7589]

 

Last one is reinforced with a piece of ice cream carton. Hmmm Kelly's Cornish! 

[attachment=o7590]

 

And THIS, is what my lovely kitchen looks like now!  I hope he's not expecting me to make him a cake!

[attachment=o7591]



What Have You Done To Your Tdm Today? - Studley Ramrod - 11-03-2016

Just how a kitchen should look. Big Grin  Great job !  :clapping:



What Have You Done To Your Tdm Today? - muddy - 11-03-2016

Quote:and now found me fork gaitors have a small tear in them, so another job to be done. Confusedorry:
s'what concerns me about those gaitors, lots of peeps report they don't last.



What Have You Done To Your Tdm Today? - ProudViking - 11-03-2016

Quote:s'what concerns me about those gaitors, lots of peeps report they don't last.
I may see if Wilbers will make carbon fork inners, seems a cheaper, easier option in the long run.



What Have You Done To Your Tdm Today? - jbx - 11-03-2016

Now I have a better understanding of the French jokes about the English food after seeing that picture from a kitchen... :blink: Wink




What Have You Done To Your Tdm Today? - Kelpie - 11-03-2016

Quote:Now I have a better understanding of the French jokes about the English food after seeing that picture from a kitchen... :blink: Wink


Haha! That's a lady biker's kitchen!


What Have You Done To Your Tdm Today? - ProudViking - 11-03-2016

The Lady Biker's Kitchen sounds like a great boozer!