Forums
Very Stuck Swingarm Bolt _ Drz400 - Printable Version

+- Forums (https://www.carpe-tdm.net)
+-- Forum: Piston broke (https://www.carpe-tdm.net/forumdisplay.php?fid=5)
+--- Forum: Hyde Park Inn (https://www.carpe-tdm.net/forumdisplay.php?fid=16)
+--- Thread: Very Stuck Swingarm Bolt _ Drz400 (/showthread.php?tid=5855)

Pages: 1 2 3 4 5 6

Very Stuck Swingarm Bolt _ Drz400 - dapleb - 29-07-2023

Thought I'd best just check Dave over since last MOT/use was 2018!!



Installed new battery, did pre flight checks and he fired right up!! Rode around in circles on tut yard...musta been windy on the yard as me eyes started watering. 乁⁠(⁠ ⁠⁠_⁠⁠ ⁠)⁠ㄏ

༎ຶ⁠‿⁠༎ຶ



Anyyyways. Other than fuel pish from carb overflow, all ok. Soft wrap on carb didnt fixy, guess need a rebuild kit as there used to be 100s of cheap drz mankini carbs on ebay (as lots swapped for fcrs)...not any more.



Looking forward to finding time for fix n pootle.

Very Stuck Swingarm Bolt _ Drz400 - dablik - 30-07-2023

Where's the time go daps, managed a couple of hours yesterday, between work/weather and hols, specially weather, 1st time out in a month, sure Dave will enjoy it  :good:



Very Stuck Swingarm Bolt _ Drz400 - dapleb - 31-07-2023

Good skills dabbers. Aint done any boiking this year.



Bagsied the last genuine mankini carb rebuild kit from Holland of all places. Might get it done by next year.

Very Stuck Swingarm Bolt _ Drz400 - dablik - 01-08-2023

Quote:Good skills dabbers. Aint done any boiking this year.



Bagsied the last genuine mankini carb rebuild kit from Holland of all places. Might get it done by next year.
 

Yep, reckon you have enough on yer plate right now, Dave will still love you.


Very Stuck Swingarm Bolt _ Drz400 - dapleb - 08-08-2023

Carb rebuild kit ear....not in the same county as the carbs though. ರ⁠_⁠ರ



Having a read ooop on carb cleaning. In the absence of an ultrasonic cleaner oi may try hot/boiling water.



Tishabelle has aviation engineering grade cleaning equipment at work.... but not sure my old skanky carbs would be welcome. ʘ⁠‿⁠ʘ



I seem to be the last durzzz and TDM carpedian standing with my mates spongey, Pa Larkin and wicky gone.

Very Stuck Swingarm Bolt _ Drz400 - leehenty - 09-08-2023

Dappers I have a big heated ultrasonic tank I got from Wicky, and the right solution for carbs. Youre welcome to either pop up and use it or put them in a box and post them. Ill do them and return.

Very Stuck Swingarm Bolt _ Drz400 - dapleb - 09-08-2023

Thanks LH. I may well take ya up on that. Might take a few weeks ish to gerrum off and dismantle. ♪⁠┌⁠|⁠∵⁠|⁠┘⁠♪

Very Stuck Swingarm Bolt _ Drz400 - Studley Ramrod - 14-08-2023

Quote:Carb rebuild kit ear....not in the same county as the carbs though. ರ⁠_⁠ರ



Having a read ooop on carb cleaning. In the absence of an ultrasonic cleaner oi may try hot/boiling water.



Tishabelle has aviation engineering grade cleaning equipment at work.... but not sure my old skanky carbs would be welcome. ʘ⁠‿⁠ʘ



I seem to be the last durzzz and TDM carpedian standing with my mates spongey, Pa Larkin and wicky gone.
:giveusahug:


Very Stuck Swingarm Bolt _ Drz400 - dapleb - 14-08-2023

Apw is custodian of pa's durrrz, jist not sure if he still has tDm

Very Stuck Swingarm Bolt _ Drz400 - dapleb - 21-08-2023

Carb off. Very stuck boat foal screws. JIS #2 wouldnt get em. Hot water and centre punch did.



There is a solenoid type thing stuck on the side of the carbs.... wondering if that might not like being dunked in ultrasonic?



Some time to dismantle now required.

Very Stuck Swingarm Bolt _ Drz400 - Catteeclan - 22-08-2023

Prob best take it off to be on the safe side. 


Very Stuck Swingarm Bolt _ Drz400 - dapleb - 22-08-2023

Thanks catte...i was trying to avoid more marshmallow screws but reckon ewe is right.

Very Stuck Swingarm Bolt _ Drz400 - Catteeclan - 23-08-2023

I had a drz some years ago but can't remember a leccy lump on the side. Doesn't take me to long to forget things Lol 

I'm guessing throttle position switch?



Very Stuck Swingarm Bolt _ Drz400 - Studley Ramrod - 23-08-2023

Quote:Carb off. Very stuck boat foal screws. JIS #2 wouldnt get em. Hot water and centre punch did.



There is a solenoid type thing stuck on the side of the carbs.... wondering if that might not like being dunked in ultrasonic?



Some time to dismantle now required.

Good skills Daps Smile


Very Stuck Swingarm Bolt _ Drz400 - dapleb - 23-08-2023

TPS on dare too Catte.



I managed to undo the solenoid location screw...also arse biscuits toight!!!





It dont come ooot all the way. Is located in boat foal, so guess some electrickery fool cut off magic!!??



Ahh its a solenoid that limits vacuum and hence dampens throttle response... sounds loike that can go in the bin!





[attachment=o15328]

Very Stuck Swingarm Bolt _ Drz400 - Catteeclan - 24-08-2023

Over complicated crap, don't remember that on mine. At least that'll come off with the float bowl.

Thinking about it I'm pretty sure mine had a flat side on it.



Very Stuck Swingarm Bolt _ Drz400 - Studley Ramrod - 24-08-2023

Quote:TPS on dare too Catte.



I managed to undo the solenoid location screw...also arse biscuits toight!!!





It dont come ooot all the way. Is located in boat foal, so guess some electrickery fool cut off magic!!??



Ahh its a solenoid that limits vacuum and hence dampens throttle response... sounds loike that can go in the bin!





[Image: attachicon.gif] Screenshot_20230823-192554.png

I agrozzle Big Grin  Deffo worth a try chief :good:


Very Stuck Swingarm Bolt _ Drz400 - dapleb - 24-08-2023

Thanks chaps. FCRs the way to go i think. Used to be able to pick up a nearly new Mikuni fur £35/40 as everyone had taken them off from new and fitted FCRs... now even mikuni juans are £100+!!!! FCRs must be helluva lot more now.



Think oil trial none solenoid. Had a read and just need to block up some 'oles is all.



Have asked LH if it can visit him for a bath when nekked!

Very Stuck Swingarm Bolt _ Drz400 - Catteeclan - 25-08-2023

Those solenoids are normally just push fit on O rings so after all this time will be tight.



Very Stuck Swingarm Bolt _ Drz400 - dapleb - 25-08-2023

Yeah. I didn't try to hard as wasnt sure what it was or where it went. Its just sat on a casting below the boat foal and has a grrt big nut on t'other side which should release it all and then has a poipe (also destination bin) that goes to top of carb to dia fra. Diaphrg. Rubber sheet thing. Allows air (which it gets from a separate air box poipe (yup bin)) into top to reduce vacuum in first three gears.