+- Forums (https://www.carpe-tdm.net)
+-- Forum: Start your Engine (https://www.carpe-tdm.net/forumdisplay.php?fid=6)
+--- Forum: KnowledgeBase (https://www.carpe-tdm.net/forumdisplay.php?fid=25)
+---- Forum: Frame, Suspension & Bodywork (https://www.carpe-tdm.net/forumdisplay.php?fid=43)
+---- Thread: Rear wheel bearings (/showthread.php?tid=35230)
Rear wheel bearings - cypher - 07-09-2010
<!--quoteo(post=177066:date=Tue 7th Sep 2010, 06:13 PM:name=merlot)-->QUOTE(merlot @ Tue 7th Sep 2010, 06:13 PM) <{POST_SNAPBACK}><!--quotec-->so how many of each tim? my other bike has 3 bearings in the rear [img]style_emoticons/<#EMO_DIR#>/ohmy.gif[/img] and do you have seal info? cheers russ<!--QuoteEnd--><!--QuoteEEnd-->
Take the sprocket carrier off (also know as cush drive hub, also referred to as clutch hub in parts catalogue) and you'll have two 60/28 bearings, one each side of the wheel hub, and one 6206 in the sprocket carrier housing.
Exploded parts view
![[Image: tdm900rearwheel.jpg]](http://i939.photobucket.com/albums/ad235/TimH247/TDM900/tdm900rearwheel.jpg)
Sorry, don't have seal info, mine were ok so I reused them.
Rear wheel bearings - wicklamulla - 08-09-2010
i'd replace the seals as they are cheap and do wear.
Rear wheel bearings - cypher - 08-09-2010
<!--quoteo(post=177185:date=Wed 8th Sep 2010, 10:06 AM:name=wicklamulla)-->QUOTE(wicklamulla @ Wed 8th Sep 2010, 10:06 AM) <{POST_SNAPBACK}><!--quotec-->i'd replace the seals as they are cheap and do wear.<!--QuoteEnd--><!--QuoteEEnd-->
yep, good advice...
Rear wheel bearings - wicklamulla - 08-09-2010
this i found out to my expense after replacing the sprocket carrier bearing and having to replace it again after only 8k !!!
Rear wheel bearings - leehenty - 05-10-2011
for seals go here much cheaper than wemoto or bike specific stores, just be sure to measure your seals they usually have the size printed on them. sized by:
bore x outside dia x thickness.
http://stores.ebay.co.uk/EBRBearing-Suppli...634Q2ec0Q2em322
Rear wheel bearings - dapleb - 05-10-2011
Lee has also mlisted sizes here: http://www.carpe-tdm.net/ipb/index.php?sho...c=23049&hl= [img]style_emoticons/<#EMO_DIR#>/good.gif[/img]
Rear wheel bearings - Godzillamonster - 03-01-2012
Happy new year all,
My rear end felt somewhat squidgy this morning - and no, it wasn't due to the curry I ate last night..
Can someone please tell me the bearing numbers for a 3VD's rear whell & sprocket carrier?
Many thanks
Rear wheel bearings - dapleb - 03-01-2012
Lee listed em ear: http://www.carpe-tdm.net/ipb/index.php?sho...c=23049&hl=
If there are no replies to sprock carrier I can have anudder dig about....anything to keep the ole gal goin.
Rear wheel bearings - dapleb - 03-01-2012
Ear ya go...courtesy of stinky:
<!--quoteo(post=40942:date=Fri 18th May 2007, 04:08 PM:name=Stink-Foot)-->QUOTE(Stink-Foot @ Fri 18th May 2007, 04:08 PM) <{POST_SNAPBACK}><!--quotec-->Correct number is 63/22 (id 22, od 56, w 16)<!--QuoteEnd--><!--QuoteEEnd-->
Rear wheel bearings - Godzillamonster - 03-01-2012
Thanks - much appreciated.
Forgive my ignorance but Lees link appears to be for the oilseals on the bearing housing rather than the bearings themselves - or am I missing something?
Rear wheel bearings - dapleb - 03-01-2012
<!--quoteo(post=229668:date=Tue 3rd Jan 2012, 10:45 PM:name=Godzillamonster)-->QUOTE(Godzillamonster @ Tue 3rd Jan 2012, 10:45 PM) <{POST_SNAPBACK}><!--quotec-->- or am I missing something?<!--QuoteEnd--><!--QuoteEEnd-->
Ooopsie. hows about these:
<i>Front wheel 2 x 6303
Rear wheel 2 x 6203 (sprocket side) & 1 x 6303</i>
Rear wheel bearings - leehenty - 04-01-2012
For 3VD,
Left bearing and middle bearings are the same, 17mm bore, 40mm outside dia, 12mm thick, 6203 2RS, so you need two.
Right wheel bearing is 17 bore, 47mm outside dia, 14mm thick. 6303 2RS.
Sprocket carrier is a 22mm bore, 56mm outside dia, 16mm thick, 63/22 with 2RS on the end for a double sealed one.
The / is very important here or you will order a massive 110mm inside diameter bearing which certainly won't fit and costs a fortune.
Sorry for the confusion. the page referred to by dappers is indeed oil seals.
Rear wheel bearings - Godzillamonster - 04-01-2012
Many thanks - much appreciated.
Rear wheel bearings - treadman - 07-05-2012
changed allmine at 40.000mls , didnt need to cos they where all fine, just did for peace of mind for the next 40,000
Neil