+- Forums (https://www.carpe-tdm.net)
+-- Forum: Start your Engine (https://www.carpe-tdm.net/forumdisplay.php?fid=6)
+--- Forum: All About TDM (https://www.carpe-tdm.net/forumdisplay.php?fid=22)
+--- Thread: Tdm Gearing Replacements - Does This Sprocket Fit On The Bike!? (/showthread.php?tid=351)
Pages:
1
2
Tdm Gearing Replacements - Does This Sprocket Fit On The Bike!? - leehenty - 13-10-2023
I have always found the standard hearing adequate, if anything geared very slightly too high.Engines like to rev it lugging them at low revs that does damage
Tdm Gearing Replacements - Does This Sprocket Fit On The Bike!? - Kebab897 - 05-11-2023
Think you can get a 17t front and 39t rear sprocket, that's about as far as you can go without having custom sprockets made up.
I recently cleared the front sprocket chain goo out and thinking there's little chance of anything larger than a 17t front sprocket fitting in there. Also, you may need to change the length of the final drive chain and speedo will be well out.
Tdm Gearing Replacements - Does This Sprocket Fit On The Bike!? - sayhello - 28-08-2025
hi there good day dear kebab897Â
Â
thank you for all your inputÂ
<pre class="_prettyXprint">
Think you can get a 17t front and 39t rear sprocket, that's about as far as you can go without having custom sprockets made up.
I recently cleared the front sprocket chain goo out and thinking there's little chance of anything larger than a 17t front sprocket fitting in there. Also, you may need to change the length of the final drive chain and speedo will be well out.</pre>
thank you so much.